Reducing or enlarging copies
Copies can be reduced to 25% of the original document size or enlarged to 400% of the original document size. The factory default setting for Scale is Auto. If you leave Scale set to Auto, then the content of your original document will be scaled to fit the size of the paper onto which you are copying.
To reduce or enlarge a copy:
1Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF. Place these items on the scanner glass.
2If you are loading a document into the ADF, then adjust the paper guides.
3From the printer control panel, press the Copy button.
4Press the Scale button.
5Press the arrow buttons until the scale option you want appears, and then press 
.
If you selected Custom then do the following:
aPress the arrow buttons to decrease or increase the size, or enter a number between 25 and 400 on the numeric keypad.
bPress 
.
6Press 
for a black only copy or 
for a color copy.
7If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.
Making a copy lighter or darker
1Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
2If you are loading a document into the ADF, then adjust the paper guides.
3From the printer control panel, press the Copy button.
4Press the Darkness button.
5Press the arrow buttons to make the copy lighter or darker.
6Press 
.
7Press 
for a black only copy or 
for a color copy.
8If you placed the document on the scanner glass and have additional pages to copy, then place the next page on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.
Copying
79