Supported flash drives and file types

Flash drive

File type

• Lexar JumpDrive 2.0

Documents:

• Pro (256 MB, 512 MB, or 1G sizes) or

•

.pdf

• SanDisk Cruzer Mini (256 MB, 512 MB, or 1G sizes);

•

.pcx

Notes:

•

.xps

•

.dcx

• Hi-Speed USB flash drives must support the Full-speed standard. Devices supporting only USB

Images:

Low-speed capabilities are not supported.

•

.gif

• USB flash drives must support the FAT (File Allocation Tables) system. Devices formatted with NTFS

•

.JPEG

(New Technology File System) or any other file system are not supported.

 

•

.bmp

 

•

.TIFF

 

•

.png

 

 

 

Printing photos from a PictBridge-enabled digital camera

You can connect a PictBridge-enabled digital camera to the printer, and use the buttons on the camera to select and print photos.

1Insert one end of the USB cable into the camera.

Note: Use only the USB cable that came with your camera.

2Insert the other end of the USB cable into the USB port on the front of the printer.

Notes:

•Make sure the PictBridge-enabled digital camera is set to the correct USB mode. See the camera documentation for more information.

•If the PictBridge connection is successful, then a confirmation message appears on the printer display.

3Follow the instructions on the camera to select and print photos.

Note: If the printer is turned off while the camera is connected, then you must disconnect and then reconnect the camera.

Printing

71