Unexpected page breaks occur
Increase the Print Timeout value:
1From the printer control panel, press 
.
2Press the arrow buttons until Settings appears, and then press 
.
3Press the arrow buttons until General Settings appears, and then press 
.
4Press the arrow buttons until Timeouts appears, and then press 
.
5Press the arrow buttons until Print Timeout appears, and then press 
.
6Press the arrow buttons until the desired value appears, and then press 
.
Solving copy problems
Copier does not respond
These are possible solutions. Try one or more of the following:
CHECK THE DISPLAY FOR ERROR MESSAGES
Clear any error messages.
CHECK THE POWER
Make sure the printer is plugged in, the power is on, and Ready appears.
Scanner unit does not close
Make sure there are no obstructions:
1Open the scanner cover.
2Remove any obstruction keeping the scanner unit open.
3Close the scanner cover.
Troubleshooting
209