HP 4400 - K4 Solution 1 Turn on the product, Solution 2 Place the original correctly on the glass

Models: 4400 - K4

1 106
Download 106 pages 35.86 Kb
Page 73
Image 73

Solution 4: The product does not support the paper or envelope

Solution 1: Turn on the product

Solution: Look at the On button located on the product. If it is not lit, the product is turned off. Make sure the power cord is firmly connected to the product and plugged into a power outlet. Press the On button to turn on the product.

Cause: The product was turned off.

If this did not solve the issue, try the next solution.

Solution 2: Place the original correctly on the glass

Solution: Load your original print side down on the right front corner of the glass.

Solve a problem

Cause: The original was placed incorrectly on the glass.

If this did not solve the issue, try the next solution.

Solution 3: Wait for the product to finish other tasks

Solution: Check the On light. If it is blinking, the product is busy.

If the product is performing another task such as printing or scanning, your copy job will be delayed until the product completes the current task.

Cause: The product was busy with another task. If this did not solve the issue, try the next solution.

Solution 4: The product does not support the paper or envelope

Solution: Do not use the product to copy onto envelopes or other papers the product does not support.

Cause: The product did not recognize the inserted paper type.

Copy troubleshooting

71

Page 73
Image 73
HP 4400 - K4 manual Solution 1 Turn on the product, Solution 2 Place the original correctly on the glass