Loading Media into Tray 3

1

2

3

4

Tray 3 adjusts for Letter, Legal, A4, JIS B5, Custom (B5 ISO), and Executive paper. The printer automatically detects the media size in Tray 3 based on the tray’s physical configuration and the position of the media-size knob.

To load media into Tray 3

CAUTION

Do not print cardstock, labels, and envelopes from Tray 3. This media should be printed only from Tray 1.

Do not overfill the input tray. Overfilling trays can cause jams in the printer.

1Remove Tray 3 and place it on a flat surface.

2Set the rear media-length guide by squeezing the release latch and sliding the guide to the length of media you are loading.

3For special-size media, flip up the special media guide.

4Squeezing the release latch, slide the media-width guides all the way open.

EN

Chapter 3 67