Transparencies
●Guidelines
●Preparing to print
●Printing
Guidelines
●For great results, use HP Premium Inkjet Transparency Film.
●Do not exceed the In tray capacity: 30 transparencies.
Preparing to print
1Raise the Out tray, and then remove all paper from the In tray.
2Slide the paper guide all the way to the left.
3Place the transparencies in the In tray.
The side to be printed on should face down and the adhesive strip should face up and toward the printer.
4Carefully push the transparencies into the printer until they stop, so that none of the adhesive strips catch on one another.
5Slide the paper guide firmly against the edge of the transparencies.
6Lower the Out tray.
Printing
1If necessary, open the Page Setup dialog box and set the paper size, scaling, and orientation options.
2Open the Print dialog box.
3Select the Paper Type/Quality panel, and then specify the following settings:
–Paper Type: The appropriate transparency type
–Print Quality: Normal or Best
4Select any other print settings that you want, and then click Print.
User's Guide | 47 |
