11/13/98 1:53 am | Catapult (US) |
First then press press
8
Menu
then
press 
5
First then press press
8
Menu
then
press 
6
First then press press
8
Menu
then
press 
7
Answer Ring Pattern
The Answer Ring Pattern setting applies only if your phone line has more than one number, each with its own distinctive ring pattern. This is a service provided by your telephone company (see page 6).
Important: If you do not have this service, the Distinctive Ring feature on the HP Fax will not work and the Answer Ring Pattern should be set to All Rings.
Press Menu, then 8, then 5.
Have your telephone company assign one ring pattern to voice calls and another to fax calls. Then use the Answer Ring Pattern setting to set your HP Fax to automatically answer the fax call pattern.
Note: If you have an answering machine on this line for receiving voice calls (using one of the other distinctive ring patterns), set it to answer after 3 or more rings (and your HP Fax after 1 or 2 rings, see page 19) or your HP Fax will not receive fax calls.
Automatic Reduction
Determines what the HP Fax does if it receives a fax too large for the paper size.
Press Menu, then 8, then 6.
On: Reduces the fax to fit the paper size setting in Basic Fax Setup.
Off: Prints the fax at actual size on multiple sheets of paper.
Error Correction Mode
Reduces data lost due to poor phone lines. On good quality phone lines, ECM will have little to no effect. However, on poor quality phone lines with static or line noise, ECM increases sending time and possibly phone charges, but sends the data much more reliably.
Press Menu, then 8, then 7.
.........................................................................................................................................
21
