HP BL e-Class LED Indicators

Introduction

Table 1-1: Interconnect Switch External Panel

Item	Description	Location
1	Gigabit Ethernet port 26 connector on Switch B	Interconnect switch
2	Gigabit Ethernet port 25 connector on Switch B	Interconnect switch
3	Integrated Administrator management RJ-45	Integrated Administrator module
	connector (Switch A Port 24—10/100 Ethernet)
4	Integrated Administrator console connector (serial)	Integrated Administrator module
5	Reserved for future use	Integrated Administrator module
6	Reserved for future use	Integrated Administrator module
7	Gigabit Ethernet port 26 connector on Switch A	Interconnect switch
8	Gigabit Ethernet port 25 connector on Switch A	Interconnect switch
9	Combined interconnect switch and Integrated	Integrated Administrator module
	Administrator Reset button

CAUTION: Do not use the enclosure link (RJ-45) connectors (refer to items 5 and 6 in Table 1-1) on the Integrated Administrator module. Connecting an external device to these enclosure link (RJ-45) connecters can damage the external device.

IMPORTANT: Resetting the interconnect switch disconnects the server blades from the network while the switch is rebooting. To reset the interconnect switch, press the Reset button for at least four seconds. To reset only the Integrated Administrator module, press the Reset button for less than four seconds.

LED Indicators

The ProLiant BL e-Class C-GbE Interconnect Switch LEDs provide information about switch health, link speed and activity, and stacking status.

1-10 HP ProLiant BL e-Class C-GbE Interconnect Switch User Guide