XML Configuration
Safe Mode Configuration File Templates
Two example template configuration files have been provided as a basis to create an appropriate safe mode configuration. Each file is delivered with the Switch Management Utilities package specific to a particular type of interconnect switch.
•esafe_ex.xml
•psafe_ex.xml
NOTE: The templates provided are only examples, and should not be used in a production environment without modifications rquired for your specific production network. These templates have commented sections for IP configuration, password protection, and port selection.
Safe Mode Configuration File Template Modification
Copy the example “Safe Mode” template to a new name. Perform modifications appropriate for your production environment. While the list below describes some of the most common modifications, your environment may require additional settings such as VLAN configuration. These basic areas are preceded by comments that include “SM:”. Use an editor such as WordPad or a standard Linux editor.
•Change the following settings if “Manual” IP settings are required.
<IP_ADDRESS>
<GET_IP_FROM VALUE="DHCP"/>
<IP_ADDRESS VALUE="10.90.90.90"/>
<SUBNET_MASK VALUE="255.0.0.0"/>
<DEFAULT_GATEWAY VALUE="0.0.0.0"/> <MANAGEMENT_VID VALUE="1"/> </IP_ADDRESS>
HP ProLiant BL |