Setting up and Installing the Interconnect Switch

To cable the interconnect tray:

Figure 2-13: Connecting the Integrated Administrator module

1.Connect the Integrated Administrator module to your network by using the management connector (10/100 Ethernet).

Figure 2-14: Connecting the network cables

2.Install the network cables. By default, each server blade has PXE enabled on Ethernet Port 1. Since the Ethernet Port 1 of every server blade physically routes through Switch A, HP recommends that either Port 25 or 26 of Switch A be used for PXE functions.

HP ProLiant BL e-Class C-GbE Interconnect Switch User Guide

2-11