Setting up and Installing the Interconnect Switch

IMPORTANT: User name and password are case-sensitive.

4. Determine the Integrated Administrator IP address using one of the following methods:

NOTE: For more information, such as determining the Integrated Administrator IP address using the Web-based user interface, refer to the HP ProLiant BL e-Class Integrated Administrator User Guide on the Documentation CD provided with your server blade enclosure.

a.If a DHCP server is attached to the network, type the following at the command line to determine the Integrated Administrator IP address:

show network

b.If a DHCP server is not attached to the network, then type the following commands to assign a static IP address to the Integrated Administrator:

set ipconfig static <IP address> <subnet mask> set gateway <IP address>

set DNS <primary DNS server address> {<secondary DNS server address>}

restart

You may now access the Integrated Administrator module through a Web browser, Secure Shell, Telnet, or SNMP connection.

5.Perform the following tasks as soon as the Integrated Administrator IP address is assigned:

a.Reset the administrator password

b.Set the day, date, and time

c.Name the server blade enclosure and rack

d.Set up groups, users, and access privileges

Accessing the Switch Modules

After your ProLiant e-Class C-GbE Interconnect Switch is installed and cabled and the Integrated Administrator is configured, you can access and configure the switch modules through the Integrated Administrator software.

1.Access the switch modules from the Integrated Administrator command line interface using one of the following methods:

a.If you have already logged into the Integrated Administrator as the “Administrator,” you can connect to either switch module console using one of the following commands:

connect switch a to access Switch A or

connect switch b to access Switch B

2-14

HP ProLiant BL e-Class C-GbE Interconnect Switch User Guide