HP BL e-Class manual 20

Setting up and Installing the Interconnect Switch

Installing a New Interconnect Tray in a New ProLiant BL e-Class Server Blade Enclosure

To install a new interconnect tray:

Figure 2-1: Removing a hot-plug power supply

1. Press the port-colored latch to release one hot-plug power supply (1).

NOTE: Port-color indicates hot-plug components.

2.Pull the handle to its open position (2).

3.Slide the hot-plug power supply out of the server blade enclosure (3).

4.Repeat steps 1 through 3 to remove the other hot-plug power supply.

Figure 2-2: Pulling the interconnect tray ejector levers

5.Press both interconnect tray release buttons (1).

6.Simultaneously pull both slate blue ejector levers toward the rear of the server blade enclosure (2).

2-2 HP ProLiant BL e-Class C-GbE Interconnect Switch User Guide