Upgrading Firmware through the Serial Port

4.Configure the download protocol (ZModem or XModem) or use the default boot configuration settings.

a.Within 60-90 seconds, press the Ctrl+C keys to display the Boot Configuration

Menu.

b.To use the default boot configuration settings, go to step 9.

Figure F-3: Boot Configuration menu

5.Select XModem or ZModem as the download protocol.

6.Highlight Reboot.

7.Press the Enter key. The switch module reboots.

HP ProLiant BL e-Class C-GbE Interconnect Switch User Guide

F-3