HP BL P-CLASS GBE2 331404-008 del, cur, del, cur, tag, del, cur, name, , or, name, name, model, uname, level, model, level, Menu], mpmodel, Command, mpmodel, name <1-32, Description

SNMPv3 Target Parameters Table configuration

Command: /cfg/sys/ssnmp/snmpv3/tparam[SNMPv3 snmpTargetParamsTable 1 Menu]

name	- Set targetParams name
mpmodel	- Set message processing model
model	- Set security model
uname	- Set USM user name
level	- Set minimum level of security
del	- Delete targetParamsTable entry
cur	- Display current targetParamsTable configuration

You can configure the target parameters entry and store it in the target parameters table in the SNMP engine. This table contains parameters that are used to generate a message. The parameters include the message processing model (for example: SNMPv3, SNMPv2c, SNMPv1), the security model (for example: USM), the security name, and

the security level (noAuthnoPriv, authNoPriv, or authPriv).

The following table describes the SNMPv3 Target Parameters Table Configuration Menu options.

Table 94 SNMPv3 Target Parameters Table Configuration Menu options

Command	Description
name <1-32	Configures the locally arbitrary, but unique identifier that is associated with this entry.
characters>
mpmodel	Configures the message processing model that is used to generate SNMP messages.
snmpv1snmpv2csnmp
v3
model	Selects the security model to be used when generating the SNMP messages.
usmsnmpv1snmpv2
uname <1-32	Defines the name that identifies the user in the USM table, on whose behalf the SNMP
characters>	messages are generated using this entry.
level	Selects the level of security to be used when generating the SNMP messages using this entry.
noAuthNoPrivauthNo	The level noAuthNoPriv means that the SNMP message will be sent without authen-
PrivauthPriv	tication and without using a privacy protocol. The level authNoPriv means that the SNMP
	message will be sent with authentication but without using a privacy protocol. The
	authPriv means that the SNMP message will be sent both with authentication and using a
	privacy protocol.
del	Deletes the targetParamsTable entry.
cur	Displays the current targetParamsTable configuration.

SNMPv3 Notify Table configuration

Command: /cfg/sys/ssnmp/snmpv3/notify

[SNMPv3 snmpNotifyTable 1			Menu]
name	- Set notify		name
tag	- Set notify tag
del	-	Delete notifyTable entry
cur	-	Display current notifyTable configuration

SNMPv3 uses Notification Originator to send out traps. A notification typically monitors a system for particular events or conditions, and generates Notification-Class messages based on these events or conditions.

Configuration Menu 102