HP BL P-CLASS GBE2 331404-008 CIST bridge configuration, Common Internal Spanning Tree configuration, brg, cur, brg, cur, fwd, cur, CIST, port, CIST, port, NOTE:, prior, mxage, secs)

NOTE:

The following configurations are unsupported:

•HP PVST+ (default Spanning Tree setting) is NOT interoperable with Cisco Rapid PVST+.

•HP MSTP/RSTP (with mode set to either ‘mstp’ or ‘rstp’) is NOT interoperable with Cisco Rapid PVST+.

The following configurations are supported:•HP PVST+ (default Spanning Tree setting) is interoperable with Cisco PVST+.•HP MSTP/RSTP (with mode set to ‘mstp’) is interoperable with Cisco MST/RSTP.Common Internal Spanning Tree configurationCommand: /cfg/l2/mrst/cist[Common Internal Spanning Tree Menu]

brg	-	CIST	Bridge parameter menu
port	-	CIST	Port parameter menu
default -		Default Common Internal Spanning Tree and Member parameters
cur	-	Display current CIST parameters

The Common Internal Spanning Tree (CIST) provides compatibility with different MSTP regions and with devices running different Spanning Tree instances. It is equivalent to Spanning Tree Group 0.

The following table describes the commands used to configure Common Internal Spanning Tree Configuration Menu options.

Table 115 Common Internal Spanning Tree Configuration Menu options

Command	Description
brg	Displays the CIST Bridge Menu.
port <port number>	Displays the CIST Port Menu.
add <1-4095>	Adds VLANs to the CIST. Enter one VLAN per line, and press Enter to add the VLANs.
default	Resets all CIST parameters to their default values.
cur	Displays the current CIST configuration.

CIST bridge configurationCommand: /cfg/l2/mrst/cist/brg

[CIST Bridge Menu]
prior	- Set CIST bridge Priority (0-65535)
mxage	- Set CIST bridge Max Age (6-40 secs)
fwd	-	Set CIST bridge Forward Delay (4-30	secs)
cur	-	Display current CIST bridge parameters

CIST bridge parameters are used only when the switch is in MSTP mode. CIST parameters do not affect operation of STP/PVST.

Configuration Menu 115