[IP Route Map 1 Menu]
alist- Access List number
aspath- AS Filter Menu

ap

- Set as-path prepend of the matched route

lp

- Set local-preference of the matched route
metric- Set metric of the matched route

type

- Set OSPF metric-type of the matched route
prec- Set the precedence of this route map
weight- Set weight of the matched route

enable

- Enable route map

disable

- Disable route map

delete

- Delete route map

current

- Display current route map configuration

Routing maps control and modify routing information. The map number (1-32) represents the routing map you wish to configure.

The following table describes the Route Map Configuration Menu options.Table 141 Route Map Configuration Menu options

Command

Description

 

 

alist <1-8>

Displays the Access List menu.

 

 

aspath <1-8>

Displays the Autonomous System (AS) Filter menu.

 

 

ap <AS number> [<AS number>]

Sets the AS path preference of the matched route. One to three path

[<AS number>]none

preferences can be configured.

 

 

lp <0-4294967294>none

Sets the local preference of the matched route, which affects both inbound

 

and outbound directions. The path with the higher preference is preferred.

 

 

metric <0-4294967294>none

Sets the metric of the matched route.

 

 

type 12none

Assigns the type of OSPF metric. The default is type 1.

 

Type 1—External routes are calculated using both internal and external

 

metrics.

 

Type 2—External routes are calculated using only the external metrics.

 

Type 2 routes have more cost than Type 2.

 

none—Removes the OSPF metric.

 

 

prec <1-256>

Sets the precedence of the route map. The smaller the value, the higher the

 

precedence. Default value is 10.

 

 

weight <0-65534>none

Sets the weight of the route map.

 

 

enable

Enables the route map.

 

 

disable

Disables the route map.

 

 

delete

Deletes the route map.

 

 

cur

Displays the current route configuration.

 

 

Configuration Menu 130