HP BL P-CLASS GBE2 331404-008 Port configuration, cur, gig, tag, ena, dis, cur, gig, dis, dis, ena, pvid, name, rmon, Table, fiber, brate, mrate, drate, fiber, aclqos, aclqos, >|none

Table 100 HTTPS Access Configuration menu options

Command	Description
certSave	Allows the client, or the Web browser, to accept the certificate and save the certificate to
	Flash to be used when the switch is rebooted.
cur	Displays the current SSL Web Access configuration.

Port configurationCommand: /cfg/port <port number>

[Port 1 Menu]
gig	- Gig Phy Menu
fiber	- Fiber Link Menu
aclqos	- Acl/Qos Configuration Menu
8021ppri	- Set default 802.1p priority
pvid	- Set default port VLAN id
name	- Set port name
rmon	- Enable/Disable RMON for port
tag	- Enable/disable VLAN tagging for port
tagpvid	- Enable/disable tagging on pvid
brate	- Set BroadCast Threshold
mrate	- Set MultiCast Threshold
drate	- Set Dest. Lookup Fail Threshold
ena	- Enable port
dis	- Disable port
cur	- Display current port configuration

This menu enables you to configure settings for individual GbE2 Interconnect Switch ports. This command is enabled by default.

The following table describes the Port Configuration Menu options.Table 101 Port Configuration Menu options

Command	Description
gig	Displays the Gigabit Ethernet Physical Link Menu.
fiber	Displays the Fiber Link Menu.
aclqos	Displays the ACL Quality of Service Menu.
8021ppri	Configures the port’s 802.1p priority level.
pvid <1-4095>	Sets the default VLAN number which will be used to forward frames
	which are not VLAN tagged. The default number is 1.
NOTE: VLAN 4095 is reserved for switch management.
name <1-64 characters>none	Sets a name for the port (maximum 64 characters). The assigned port
	name displays next to the port number on some information and statistics
	screens.
rmon disableenable	Enables or disables Remote Monitoring for the port. RMON must be
	enabled for any RMON configurations to function.
tag disableenable	Disables or enables VLAN tagging for this port. It is disabled by default.
tagpvid disableenable	Disables or enables VLAN tag persistence. When disabled, the VLAN tag
	is removed from packets whose VLAN tag matches the port PVID. The
	default value is enabled.
brate <0-262143>dis	Limits the number of broadcast packets per second to the specified value.
	If disabled (dis), the port forwards all broadcast packets.
mrate <0-262143>dis	Limits the number of multicast packets per second to the specified value. If
	disabled (dis), the port forwards all multicast packets.
drate <0-262143>dis	Limits the number of unknown unicast packets per second to the specified
	value. If disabled (dis), the port forwards all unknown unicast packets.
ena	Enables the port.

Configuration Menu 106