HP BL P-CLASS GBE2 331404-008 IP Access List configuration, Autonomous System Path configuration

IP Access List configuration

Command: /cfg/l3/rmap <1-32>/alist <1-8>

[IP Access List		1 Menu]
nwf	-	Network Filter number
metric	-	Metric
action	-	Set Network Filter action
enable	-	Enable Access List
disable	-	Disable Access List
delete	-	Delete Access List
current	-	Display current Access List configuration

The route map number (1-32) and the access list number (1-8) represent the IP access list you wish to configure. The following table describes the IP Access List Configuration Menu options.

Table 142 IP Access List Configuration Menu options

Command	Description
nwf <1-256>	Sets the network filter number.
metric <1-4294967294>none	Sets the metric value in the AS-External (ASE) LSA.
action permitdeny	Permits or denies action for the access list.
enable	Enables the access list.
disable	Disables the access list.
delete	Deletes the access list.
cur	Displays the current Access List configuration.

Autonomous System Path configuration

Command: /cfg/l3/rmap <1-32>/aspath <1-8>

[AS Filter 1 Menu]

as	- AS number
action	- Set AS Filter action
enable	- Enable AS Filter
disable	- Disable AS Filter
delete	- Delete AS Filter
current	- Display current AS Filter configuration

The rmap number (1-32) and the path number (1-8) represent the AS path you wish to configure. The following table describes the Autonomous System Path Configuration Menu options.

Table 143 Autonomous System Path Configuration Menu options

Command	Description
as <1-65535>	Sets the Autonomous System filter’s path number.
action permitdeny	Permits or denies Autonomous System filter action.
enable	Enables the Autonomous System filter.
disable	Disables the Autonomous System filter.
delete	Deletes the Autonomous System filter.
cur	Displays the current Autonomous System filter configuration.

Configuration Menu 131