HP BL P-CLASS GBE2 331404-008 del, cur, des, des, del, cur, del, cur, name, auth, priv, none, none, name, tree, mask, type, authpw, privpw, authpw, privpw, 1 Menu], Command, name <1-32

User Security Model configuration

Command: /cfg/sys/ssnmp/snmpv3/usm

[SNMPv3 usmUser		1 Menu]
name	-	Set USM user name
auth	-	Set authentication protocol
authpw	-	Set authentication password
priv	-	Set privacy protocol
privpw	-	Set privacy password
del	-	Delete usmUser entry
cur	-	Display current usmUser configuration

You can make use of a defined set of user identities using this Security Model. An SNMP engine must have the knowledge of applicable attributes of a user.

This menu helps you create a user security model entry for an authorized user. You need to provide a security name to create the USM entry.

The following table describes the User Security Model Configuration Menu options.

Table 88 User Security Model Configuration Menu options

Command	Description
name <1-32	Configures a string up to 32 characters long that represents the name of the user. This is the
characters>	login name that you need in order to access the switch.
auth md5shanone	Configures the authentication protocol between HMAC-MD5-96 or HMAC-SHA-96. The
	default algorithm is none.
authpw	Configures your password for authentication. If you selected an authentication algorithm using
	the above command, you need to provide a password; otherwise you will get an error
	message during validation.
priv desnone	Configures the type of privacy protocol on the switch. The privacy protocol protects messages
	from disclosure. The options are des (CBC-DES Symmetric Encryption Protocol) or none. If
	you specify des as the privacy protocol, then be sure that you have selected one of the
	authentication protocols (MD5 or HMAC-SHA-96). If you select none as the authentication
	protocol, you will get an error message.
privpw	This command allows you to create or change the privacy password.
del	Deletes the USM user entries.
cur	Displays the USM user entries.

SNMPv3 View configuration

Command: /cfg/sys/ssnmp/snmpv3/view[SNMPv3 vacmViewTreeFamily 1 Menu]

name	- Set view name
tree	- Set MIB subtree(OID) which defines a family of view subtrees
mask	- Set view mask
type	- Set view type
del	- Delete vacmViewTreeFamily entry
cur	- Display current vacmViewTreeFamily configuration

Configuration Menu 98