HP BL P-CLASS GBE2 331404-008 cos, ena, dis, del, cur, cos, ena, dis, del, cur, cur, name, pswd, port, Menu], access, access, number, Command, Command, [User ID, certSave, generate

User ID configuration

Command: /cfg/sys/access/user/uid <1-10>

[User ID 1	Menu]
cos	- Set class of service
name	- Set user name
pswd	- Set user password
ena	- Enable user ID
dis	- Disable user ID
del	- Delete user ID
cur	- Display current user configuration

The following table describes the User ID Configuration menu options.Table 99 User ID Configuration menu options

Command	Description
cos	Sets the Class-of-Service to define the user’s authority level.
<useroperadmin>
name <1-8	Defines the user name.
characters>
pswd <1-128	Sets the user password of up to 128 characters maximum.
characters>
ena	Enables the user ID.
dis	Disables the user ID.
del	Deletes the user ID.
cur	Displays the current user ID parameters.

HTTPS Access configuration

Command: /cfg/sys/access/https

[https Menu]
access	- Enable/Disable HTTPS Web access
port	- HTTPS WebServer port number
generate - Generate self-signed HTTPS server certificate
certSave	- save HTTPS certificate
cur	- Display current SSL Web Access configuration

The following table describes the HTTPS Access Configuration menu options.Table 100 HTTPS Access Configuration menu options

Command	Description
access	Enables or disables BBI access (Web access) using HTTPS.
port <TCP port	Defines the HTTPS Web server port number.
number>
generate	Allows you to generate a certificate to connect to the SSL to be used during the key exchange.
	A default certificate is created when HTTPS is enabled for the first time. The user can create a
	new certificate defining the information that they want to be used in the various fields. For
	example:
	•	Country Name (2 letter code) [ ]: CA
	•	State or Province Name (full name) [ ]: Ontario
	•	Locality Name (for example, city) [ ]: Ottawa
	•	Organization Name (for example, company) [ ]: Hewlett Packard
	•	Organizational Unit Name (for example, section) [ ]: ProLiant
	•	Common Name (for example, user’s name) [ ]: Mr Smith
	•	Email (for example, email address) [ ]: info@hp.com

You must confirm if you want to generate the certificate. It takes approximately 30 seconds to generate the certificate. Then the switch restarts SSL agent.

Configuration Menu 105