HP BL P-CLASS GBE2 331404-008 add, rem, cur, add, rem, cur, uid, opw, cur, cur, oper, usrpw, admpw, admin, Command, Command, uid <1-10, characters, opw <1-128, characters, characters

Management Networks configuration

Command: /cfg/sys/access/mgmt[Management Networks Menu]

add	- Add mgmt network definition
rem	-	Remove mgmt network definition
cur	-	Display current mgmt network definitions

The following table describes the Management Networks Configuration menu options.

Table 97 Management Networks Configuration menu options

Command	Description
add <IP address> <IP mask>	Adds a defined network through which switch access is allowed through
	Telnet, SNMP, RIP, or the browser-based interface. A range of IP addresses is
	produced when used with a network mask address. Specify an IP address
	and mask address in dotted-decimal notation.
rem <IP address> <IP mask>	Removes a defined network, which consists of a management network
	address and a management network mask address.
cur	Displays the current management networks parameters.

User Access Control configuration

Command: /cfg/sys/access/user[User Access Control Menu]

uid	- User ID Menu
usrpw	- Set user password (user)
opw	- Set operator password (oper)
admpw	-	Set administrator password (admin)
cur	-	Display current user status

The following table describes the User Access Control menu options.Table 98 User Access Control Configuration menu options

Command	Description
uid <1-10>	Displays the User ID Menu for the selected user.
eject <1-10>	Ejects the selected user from the switch.
usrpw <1-128	Sets the user (user) password (maximum 128 characters). The user has no direct
characters>	responsibility for switch management. He or she can view switch status information and
	statistics, but cannot make any configuration changes.
opw <1-128	Sets the operator (oper) password (maximum 128 characters). The operator manages all
characters>	functions of the switch. He or she can view all switch information and statistics and can reset
	ports or the entire switch.
admpw <1-128	Sets the administrator (admin) password (maximum 128 characters). The super user
characters>	administrator has complete access to all menus, information, and configuration commands on
	the switch, including the ability to change both the user and administrator passwords.
cur	Displays the current user status.

Configuration Menu 104