HP BL P-CLASS GBE2 331404-008 SNMPv3 Target Address Table information, SNMPv3 Target Parameters Table information, Name, Port, Name, Port, Name, Name, trap1, Field, Field, entry, Params

SNMPv3 Target Address Table informationCommand: /info/sys/snmpv3/taddr

Name	Transport Addr	Port	Taglist	Params
----------	---------------	----	----------	---------------
trap1	47.81.25.66	162	v1v2trap	v1v2param

This command displays the SNMPv3 target address table information, which is stored in the SNMP engine. The following table describes the SNMPv3 Target Address Table information.

Table 14 Target Address Table Information parameters

Field	Description
Name	Displays the locally arbitrary, but unique identifier associated with this
	snmpTargetAddrEntry.
Transport Addr	Displays the transport addresses.
Port	Displays the SNMP UDP port number.
Taglist	This column contains a list of tag values which are used to select target addresses for a
	particular SNMP message.
Params	The value of this object identifies an entry in the snmpTargetParamsTable. The identified
	entry contains SNMP parameters to be used when generating messages to be sent to this
	transport address.

SNMPv3 Target Parameters Table informationCommand: /info/sys/snmpv3/tparam

Name	MP Model	User Name	Sec Model Sec Level
-------------------	--------	-------------------- --------- -----------
v1v2param	snmpv2c	v1v2only	snmpv1	noAuthNoPriv

The following table describes the SNMPv3 Target Parameters Table information.Table 15 Target Parameters Table

Field	Description
Name	Displays the locally arbitrary, but unique identifier associated with this snmpTargeParamsEntry.
MP Model	Displays the Message Processing Model used when generating SNMP messages using this
	entry.
User Name	Displays the securityName, which identifies the entry on whose behalf SNMP messages will be
	generated using this entry.
Sec Model	Displays the security model used when generating SNMP messages using this entry. The system
	may choose to return an inconsistentValue error if an attempt is made to set this variable to a
	value for a security model which the system does not support.
Sec Level	Displays the level of security used when generating SNMP messages using this entry.

Information Menu 27