HP BL P-CLASS GBE2 331404-008 ufd, cur, ufd, name, locn, cont, auth, rcomm, wcomm, linkt, rcomm, wcomm, snmpv3, snmpv3, public, timeout, Command, private, disabled, locn <1-64, characters

System SNMP configuration
Command: /cfg/sys/ssnmp
	[SNMP Menu]
	snmpv3	- SNMPv3 Menu
	name	- Set SNMP "sysName"
	locn	- Set SNMP "sysLocation"
	cont	- Set SNMP "sysContact"
	rcomm	- Set SNMP read community string
	wcomm	- Set SNMP write community string
	timeout	- Set timeout for the SNMP state machine
	auth	- Enable/disable SNMP "sysAuthenTrap"
	linkt	- Enable/disable SNMP link up/down trap
	ufd	- Enable/disable SNMP Uplink Failure Detection trap
	cur	- Display current SNMP configuration

GbE2 software supports SNMP-based network management. In SNMP model of network management, a management station (client/manager) accesses a set of variables known as MIBs (Management Information Base) provided by the managed device (agent). If you are running an SNMP network management station on your network, you can manage the switch using the following standard SNMP MIBs:

•MIB II (RFC 1213)•Ethernet MIB (RFC 1643)•Bridge MIB (RFC 1493)

An SNMP agent is a software process on the managed device that listens on UDP port 161 for SNMP messages. Each SNMP message sent to the agent contains a list of management objects to retrieve or to modify.

•SNMP parameters that can be modified include:•System name•System location•System contact•Use of the SNMP system authentication trap function•Read community string•Write community stringThe following table describes the System SNMP Configuration Menu options.Table 86 System SNMP Configuration Menu options

Command		Description
snmpv3		Displays SNMPv3 menu.
name <1-64 characters>		Configures the name for the system. The name can have a maximum of 64 characters.
locn <1-64	characters>	Configures the name of the system location. The location can have a maximum of 64
		characters.
cont <1-64	characters>	Configures the name of the system contact. The contact can have a maximum of 64
		characters.

rcomm <1-32 characters> Configures the SNMP read community string. The read community string controls SNMP “get” access to the switch. It can have a maximum of 32 characters. The default read community string is public.

wcomm <1-32 characters> Configures the SNMP write community string. The write community string controls SNMP “set” and “get” access to the switch. It can have a maximum of 32 characters. The default write community string is private.

timeout <1-30>	Sets the timeout value for the SNMP state machine. The range is 1-30 minutes. The
	default value is 5 minutes.
auth disableenable	Enables or disables the use of the system authentication trap facility. The default setting
	is disabled.
linkt <port>	Enables or disables the sending of SNMP link up and link down traps. The default
[disableenable]	setting is enabled.
ufd	Enables or disables the sending of Uplink Failure Detection traps. The default setting is
	disabled.
	Configuration Menu 96