HP BL P-CLASS GBE2 331404-008 cur, cur, cur, cur, cur, cur, up1p, up1p, Menu], reset, reset, value, utosp, reset, reset, reset, reset, updscp, updscp, Command, Command, Command, Reset in

ACL Port Re-Mark In-Profile configuration

Command: /cfg/port <port number>/aclqos/re-mark <1-63>/inprof

[Re-marking - In Profile			Menu]
up1p	- Set Update User Priority Menu
updscp	- Set the update DSCP
reset	-	Reset in	profile settings
cur	-	Display current settings

The following table describes the ACL Port Re-Mark In-Profile Configuration Menu options.

Table 107 ACL Port Re-Mark In-Profile Configuration Menu options

Command	Description
up1p	Displays the Re-Mark In-Profile Update User Priority Menu.
updscp <0-63>	Sets the DiffServ Code Point (DSCP) of In-Profile packets to the selected value.
reset	Resets the update DSCP parameters to their default values.
cur	Displays current Re-Mark In-Profile parameters.

Re-Mark Update User Priority configuration

Command: /cfg/port <port number>/aclqos/re-mark <1-63>/inprof/up1p[Update User Priority Menu]

value	- Set the update user priority
utosp	- Enable/Disable use of TOS precedence
reset	-	Reset in profile up1p settings
cur	-	Display current settings

The following table describes the Update User Priority Configuration Menu options.

Table 108 ACL Port Update User Priority Configuration Menu options

Command	Description
value <0-7>	Defines 802.1p value. The value is the priority bits information in the packet
	structure.
utosp enabledisable	Enable or disable mapping of TOS (Type of Service) priority to 802.1p priority for
	In-Profile packets. When enabled, the TOS value is used to set the 802.1p value.
reset	Resets UP1P settings to their default values.
cur	Displays current Re-Mark In-Profile User Priority parameters.

ACL Port Re-Mark Out-of-Profile configuration

Command: /cfg/port <port number>/aclqos/re-mark <1-63>/outprof[Re-marking - Out Of Profile Menu]

updscp	- Set the update DSCP
reset	-	Reset out of profile settings
cur	-	Display current settings

The following table describes the Re-Mark Out-of-Profile Configuration Menu options.

Table 109 ACL Port Re-Mark Out-of-Profile Configuration Menu options

Command	Description
updscp <0-63>	Sets the DiffServ Code Point (DSCP) of Out-of-Profile packets to the selected value. The
	switch sets the DSCP value on Out-of-Profile packets.
reset	Resets the update DSCP parameters for Out-of-Profile packets to their default values.
cur	Displays current Re-Mark Out-of-Profile parameters.
	Configuration Menu 110