HP BL P-CLASS GBE2 331404-008 Maintenance Menu, sys, fdb, arp, sys, fdb, arp, igmp, igmp, debug, route, uudmp, ptdmp, cldmp, panic, tsdmp, Table, debug, route, uudmp, cldmp, panic, tsdmp

Maintenance Menu

Introduction

The Maintenance Menu is used for debugging purposes, enabling you to generate a technical support dump of the critical state information in the GbE2 Interconnect Switch, and to clear entries in the Forwarding Database and the Address Resolution Protocol (ARP) and routing tables. This menu is available only from an administrator and operator login.

Menu information

Command: /maint[Maintenance Menu]

sys	- System Maintenance Menu
fdb	- Forwarding Database Manipulation Menu
debug	- Debugging Menu
arp	- ARP Cache Manipulation Menu
route	- IP Route Manipulation Menu
igmp	- IGMP Multicast Group Menu
uudmp	- Uuencode FLASH dump
ptdmp	- tftp put FLASH dump to tftp server
cldmp	- Clear FLASH dump
panic	- Dump state information to FLASH and reboot
tsdmp	- Tech support dump

pttsdmp - tftp put tech support dump to tftp server

Dump information contains internal GbE2 Interconnect Switch state data that is written to flash memory on the switch after any one of the following occurs:

•The GbE2 Interconnect Switch administrator forces a switch panic. The panic option, found in the Maintenance Menu, causes the GbE2 Interconnect Switch to dump state information to flash memory, and then causes the switch to reboot.

•The GbE2 Interconnect Switch administrator enters the switch reset key combination (Ctrl-Shift-6) on a device that is attached to the console port.

•The GbE2 Interconnect Switch detects a hardware or software problem that requires a reboot.

The following table describes the Maintenance Menu options.

Table 194	Maintenance Menu options
Command	Usage
sys	Displays the System Maintenance Menu.
fdb	Displays the Forwarding Database Manipulation Menu.
debug	Displays the Debug Menu.
arp	Displays the ARP Cache Manipulation Menu.
route	Displays the IP Route Manipulation Menu.
igmp	Displays the IGMP Maintenance Menu.
uudmp	Displays dump information in uuencoded format.
ptdmp hostname, filename [-mgmt-data]Saves the system dump information via TFTP.
cldmp	Clears dump information from flash memory.
panic	Dumps MP information to flash and reboots.
tsdmp	Dumps all GbE2 Interconnect Switch information, statistics, and
	configuration.
pttsdmp	Redirects the technical support dump (tsdmp) to an external TFTP
	server.

Maintenance Menu 167