HP BL P-CLASS GBE2 331404-008 del, cur, cur, cur, mgmt, user, http, snmp, tnet, mgmt, user, tnet, https, wport, tport, https, wport, tport, tnport, number, number, number, Command

The following table describes the SNMPv3 Notify Table Configuration menu options.

Table 95 SNMPv3 Notify Table Configuration Menu options

Command	Description
name <1-32	Defines a locally arbitrary but unique identifier associated with this SNMP notify entry.
characters>
tag <1-255	Defines a tag of 255 characters maximum that contains a tag value which is used to select
characters>	entries in the Target Address Table. Any entry in the snmpTargetAddrTable, that
	matches the value of this tag, is selected.
del	Deletes the notify table entry.
cur	Displays the current notify table configuration.

System Access configuration

Command: /cfg/sys/access[System Access Menu]

mgmt	- Management Network Definition Menu
user	- User Access Control Menu (passwords)
http	- Enable/disable HTTP (Web) access
https	- HTTPS Web Access Menu
wport	- Set HTTP (Web) server port number
snmp	- Set SNMP access control
tnet	- Enable/disable Telnet access
tnport	- Set Telnet server port number
tport	- Set the TFTP Port for the system
cur	- Display current system access configuration

The following table describes the System Access Configuration menu options.Table 96 System Access Configuration Menu options

Command	Description
mgmt	Displays the Management Configuration Menu.
user	Displays the User Access Control Menu.
http disableenable	Enables or disables HTTP (Web) access to the Browser-Based Interface. It is enabled by
	default.
https	Displays the HTTPS Menu.
wport <TCP port	Sets the switch port used for serving switch Web content. The default is HTTP port 80. If
number>	Global Server Load Balancing is to be used, set this to a different port (such as 8080).
snmp disableread-	Disables or provides read-only/write-read SNMP access.
onlyread-write
tnet	Enables or disables telnet access. This command is enabled by default. You will see this
	command only if you are connected to the switch through the management module.
tnport <TCP port	Sets an optional telnet server port number for cases where the server listens for telnet sessions
number>	on a non-standard port.
tport <TFTP port	Sets an optional telnet server port number for cases where the server listens for telnet sessions
number>	on a non-standard port.
cur	Displays the current system access parameters.

Configuration Menu 103