ACL Port Metering configuration

Command: /cfg/port <port number>/aclqos/meter
[Metering Menu]

 

cir

-

Set committed rate in KiloBits/s
mbsize

-

Set maximum burst size in KiloBits
enable

-

Enable/disable port metering
dpass

-

Set to Drop or Pass out of profile traffic
assign

-

Assign meter to ACL, ACL block or ACL group
unassign

-

Unassign meter from ACL, ACL block or ACL group
reset

-

Reset meter parameters

cur

-

Display current settings

 

 

 

The following table describes the ACL Port Metering Configuration Menu options.Table 105 ACL Port Metering Configuration Menu options

Command

Description

 

 

cir <64-1000000>

Configures the committed rate, in Kilobits per second. The committed rate

 

must be a multiple of 64.

 

 

mbsize <32-4096>

Configures the maximum burst size, in Kilobits. Enter one of the following

 

values for mbsize: 32, 64, 128, 256, 512, 1024, 2048, 4096

 

 

enable ed

Enables or disables ACL Metering on the port.

 

 

dpass droppass

Configures the ACL Meter to either drop or pass out-of-profile traffic.

 

 

assign aclblkgrp <1-4096>

Adds an ACL, ACL Block, or ACL Group to the ACL Meter on this port.

 

 

unassign aclblkgrp <1-4096>

Removes an ACL, ACL Block, or ACL Group from the ACL Meter on this port.

 

 

reset

Reset ACL Metering parameters to their default values.

 

 

cur

Displays current ACL Metering parameters.

 

 

ACL Port Re-Mark configuration

Command: /cfg/port <port number>/aclqos/re-mark <1-63>
[Re-mark Menu

Menu]

inprof- In Profile Menu
outprof- Out Profile Menu

assign

- Assign re-mark action to ACL item

unassign

- Unassign re-mark action from ACL item

reset

- Reset re-mark settings

cur

- Display current settings

 

 

You can choose to re-mark IP header data for the selected ACL Group on the port. You can configure different remark values, based on whether packets fall within the ACL Metering profile, or out of the ACL Metering profile.

The following table describes the ACL Port Re-Mark Configuration Menu options.Table 106 ACL Port Re-Mark Configuration Menu options

Command

Description

 

 

 

inprof

Displays the Re-Mark In-Profile Menu.

 

 

 

outprof

Displays the Re-Mark Out-of-Profile Menu.

 

 

 

assign aclblkgrp <1-4096>

Assign an ACL, ACL Block, or ACL Group for DSCP remarking on this port.

 

 

 

unassign aclblkgrp <1-4096>

Remove an ACL, ACL Block, or ACL Group from DSCP remarking on this

 

port.

 

 

 

reset

Reset ACL Re-Mark parameters to their default values.

 

 

 

cur

Displays current Re-Mark parameters.

 

 

 

 

 

 

Configuration Menu 109