4Finish setting up the HP All-in- One

After you have completed the steps in your Setup Guide, refer to this section to help you finish setting up the HP All-in-One. This section contains important setup-related information for your device, including information on setting preferences.

This section contains the following topics:

•Set your preferences

•Computer connection information

•Connect to a network

Finish setup

Set your preferences

You can change the settings on the HP All-in-One so that it behaves according to your preference. For example, you can set general device preferences, such as the language used to display messages. You can also restore the device settings to what they were when you purchased your device. This will erase any new defaults you have set.

This section contains the following topics:

•Set your language and country/region

•Adjust the volume

•Set the default paper tray for PictBridge/DPOF/uPnP printing

•Enable faster browsing of photos

•Set the paper tray for printing from a Bluetooth device

•Restore the factory defaults

•Play a slideshow on the display

•Share CD/DVD drive

Set your language and country/region

The language setting determines which language the HP All-in-One uses to show messages on the display. The country/region setting determines the default paper sizes and layouts for printing. You can change these settings at any time by using the following procedures.

To set the language

1.Touch Setup on the display.

2.Touch Preferences.
3.Touch Set Language.

Finish setting up the HP All-in-One

19