6.When you have finished entering a name for the HP All-in-One, touch OK.

The name you entered will appear on your Bluetooth device when you connect to the HP All-in-One to print.

7.Touch OK to exit the Setup menu.

Related topics

“Enter text using the visual keyboard” on page 14

Set Bluetooth security for the HP All-in-One

You can enable printer security settings through the Bluetooth menu on the HP All-in- One. Touch Setup on the display, and then touch Bluetooth. From the Bluetooth menu, you can:

•Require passkey authentication prior to someone printing to the HP All-in-One from a Bluetooth device.

•Make the HP All-in-One visible or invisible to Bluetooth devices that are within range.

This section contains the following topics:

•Use a passkey to authenticate Bluetooth devices

•Set the HP All-in-One to be invisible to Bluetooth devices

•Turn the Bluetooth radio on and off

•Reset Bluetooth settings on the HP All-in-One

Finish setup

Use a passkey to authenticate Bluetooth devices

You can set the security level of the HP All-in-One to either Low or High. The default security setting is Low. Low level security does not require authentication.

•Low: This is the default security setting. Low level security does not require a passkey, as it does not support authentication. Any Bluetooth device within range can print to it.

•High: High level security requires a passkey, as it supports authentication. The Bluetooth device must provide a passkey, before the HP All-in-One will allow the device to send a print job to it.

NOTE: The HP All-in-One ships with a predefined passkey that is set to four zeroes "0000".

To set the HP All-in-One to require passkey authentication

1.Touch Setup on the display.

2.Touch Bluetooth.

NOTE: If the menu option you want is not visible on the screen, touch or

to scroll through all the menu options.

3.Touch Passkey.

4.Touch Change.

Computer connection information

25