HP C8100 Choose papers for printing and copying, Recommended papers for printing and copying, To remove the lid

To remove the lid

1.Lift the lid to the open position, grasp the sides of the lid, and then pull the lid upwards until it comes off.

Do not unplug the Slide and Negative Film light power cord. It should stay connected to the back of the HP All-in-One.

2.Place the lid over the oversized original while you are copying or scanning.

3.When you finish copying or scanning, replace the lid by inserting the tabs on the lid back into the appropriate slots of the HP All-in-One.

Choose papers for printing and copying

You can use different types and sizes of paper in the HP All-in-One. Review the following recommendations to get the best printing and copying quality. Whenever you change paper types or sizes, remember to change those settings.

This section contains the following topics:

•Recommended papers for printing and copying

•Recommended papers/media for printing only

•Papers to avoid

Load originals and load paper

Recommended papers for printing and copying

If you want the best print quality, HP recommends using HP papers that are specifically designed for the type of project you are printing. If you are printing photos, for example, load HP Premium or HP Premium Plus photo paper in the input tray.

Choose papers for printing and copying 61