access only to the print features. You must perform other functions from the host computer or from the control panel on the HP All-in-One.

To enable printer sharing on a Windows computer

▲Refer to the user guide that came with your computer or see the Windows onscreen Help.

Connect to a network

This section describes how to connect the HP All-in-One to a network and how to view and manage network settings.

 

If you want to:See this section:

 

 

 

 

 

 

Connect to a wired (Ethernet) network.

“Wired network setup” on page 30

 

 

 

 

 

 

Connect to a wireless network with a wireless

“Integrated wireless WLAN 802.11 network

 

router (infrastructure).

setup” on page 32

 

 

 

 

 

 

Connect directly to a wireless-capable

“Wireless ad hoc network setup” on page 35

 

computer without a wireless router (ad hoc).

 

 

 

 

 

 

 

Install the HP All-in-One software for use in a

“Install the software for a network connection”

 

networked environment.

on page 39

 

 

 

 

 

 

Add connections to more computers on the

“Connect to additional computers on a

 

network.

network” on page 39

 

 

 

 

 

 

Change the HP All-in-One from a USB

“Change the HP All-in-One from a USB

 

connection to a network connection.

connection to a network connection”

 

 

 

 

on page 40

 

NOTE: Use the instructions in this section if

 

 

 

you first installed the HP All-in-One with a USB

 

 

connection, and you now want to change to

 

 

either a wireless or Ethernet network

 

 

connection.

 

 

 

 

 

 

 

 

 

 

 

View or change the network settings.

“Manage your network settings” on page 40

 

 

 

 

 

Find troubleshooting information.

“Network troubleshooting” on page 158

 

 

 

 

 

 

 

 

 

 

Finish setup

NOTE: You can connect the HP All-in-One to either a wireless or wired network, but not both at the same time.

Connect to a network

29