HP C8100 Load an original in the Slide and Negative Film holder, To load 35 mm negatives

Chapter 6

3.Close the lid.

Load an original in the Slide and Negative Film holder

You can scan 35 mm slides and negatives with the HP All-in-One using the Slide and Negative Film holder.

After you scan slides or negatives, remove the slide or negative film from the holder, and then replace the holder and lid backing on the HP All-in-One.

To load 35 mm negatives

1.Raise the lid, remove the lid backing, and then remove the Slide and Negative Film holder. Set the lid backing aside where it will not get damaged or dirty.

originals Load load and paper

2.Arrange the holder so that the negative film portion is at the bottom and the film opening is on the right side.

58 Load originals and load paper