
8.When prompted, type the new password again to confirm, and then press enter.
9.To save your changes and exit Computer Setup, click the Save icon in the
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press enter.
Your changes go into effect when the computer restarts.
Removing DriveLock protection
To remove DriveLock protection in Computer Setup, follow these steps:
1.Turn on the computer, and then press esc while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen.
2.Press f10 to enter Computer Setup.
3.Use a pointing device or the arrow keys to select Security > DriveLock, and then press enter.
4.Use a pointing device or the arrow keys to select Set DriveLock Password, and then press enter.
5.Use a pointing device or the arrow keys to select an internal hard drive, and then press enter.
6.Use a pointing device or the arrow keys to select Disable protection.
7.Type your master password, and then press enter.
8.To save your changes and exit Computer Setup, click the Save icon and then follow the on- screen instructions.
– or –
Use the arrow keys to select File > Save Changes and Exit, and then press enter.
Your changes go into effect when the computer restarts.
Using Computer Setup Automatic DriveLock
In a
NOTE: You must have a BIOS administrator password before you can access the Automatic DriveLock features.
Entering an Automatic DriveLock password
To enable an Automatic DriveLock password in Computer Setup, follow these steps:
1.Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu” message is displayed at the bottom of the screen.
2.Press f10 to enter Computer Setup.
90 Chapter 9 Security