Installing a hard drive
To install the hard drive for the EliteBook:
1.Insert the hard drive into the hard drive bay at an angle (1), and then lay the hard drive flat in the hard drive bay (2).
2.Pull the plastic tab (3) toward the center of the computer to engage the hard drive with the connector.
3.Tighten the hard drive screws (4).
4.Rotate the smart card reader (1) until it lies flat on top of the hard drive.
5.Press the smart card reader down and toward the side of the computer (2) to engage it into place.
6.Replace the service door (see Replacing the service door on page 67).
7.Insert the battery (see Inserting or removing the battery on page 51).
70 Chapter 8 Drives
