HP M1214nfh, M1216nfh, M1213nf manual Invalid entry, No dial tone, No document sent

Control panel message	Description	Recommended action
Fax Send error	An error occurred while trying to send a fax.	Try resending the fax.
		Try faxing to another fax number.
		Check for a dial tone on the phone line by
		pressing the Send Fax	button.
		Check that the telephone cord is securely
		connected by unplugging and replugging the
		cord.
		Make sure that you are using the telephone
		cord that came with the product.
		Make sure that the phone is working by
		disconnecting the product, plugging in a
		telephone to the phone line, and making a
		voice call.
		Connect the product to a different phone
		line.
		Set the fax resolution to Standard instead
		of the default of Fine.
		If the error persists, contact HP. See
		www.hp.com/support/ljm1210series or the
		support flyer that came in the product box.
Invalid entry	Invalid data or response.	Correct the entry.
No dial tone	The product could not detect a dial tone.	Check for a dial tone on the phone line by
		pressing the Send Fax	button.
		Unplug the telephone cord from both the
		product and the wall and replug the cord.
		Make sure that you are using the telephone
		cord that came with the product.
		Unplug the product telephone cord from the
		wall, plug in a telephone, and try making a
		voice call.
		Make sure that the phone cord from the wall
		telephone jack is plugged into the line
		port.
		Plug the product phone cord into a jack for
		another phone line.
		If the error persists, contact HP. See
		www.hp.com/support/ljm1210series or the
		support flyer that came in the product box.
No document sent	The product did not scan any pages, or it	Try sending the fax again.
	did not receive any pages from the computer
	to transmit a fax.

140 Chapter 10 Fax (M1210 Series only) ENWW