HP M1216nfh, M1214nfh, M1213nf manual Redial pending, No fax detected

Control panel message	Description	Recommended action
No fax answer.	The receiving fax line did not answer. The	Allow the product to retry sending the fax.
Redial pending	product attempts to redial after a few	Call the recipient to ensure that the fax
	minutes.
		machine is on and ready.
		Check that you are dialing the correct fax
		number.
		If the product continues to redial, unplug the
		product telephone cord from the wall, plug in
		a telephone, and try making a voice call.
		Make sure that the phone cord from the wall
		telephone jack is plugged into the line
		port.
		Plug the product phone cord into a jack for
		another phone line.
		Try a different phone cord.
		If the error persists, contact HP. See
		www.hp.com/support/ljm1210series or the
		support flyer that came in the product box.
No fax detected	The product answered the incoming call but	Allow the product to retry receiving the fax.
	did not detect that a fax machine was	Try a different phone cord.
	calling.
		Plug the product phone cord into a jack for
		another phone line.
		If the error persists, contact HP. See
		www.hp.com/support/ljm1210series or the
		support flyer that came in the product box.

142 Chapter 10 Fax (M1210 Series only) ENWW