Printer parts
Front of printer
English
1Control panel and indicator lights: Use the buttons on the control panel to open the Toolbox on the computer, resume or cancel print jobs, and respond to prompts on the computer screen. View the lights to check the printer status. For more information on the indicator lights, see Error states and indicator light behavior.
2Top door: Lift to gain access to the printheads and to clear paper jams.
3Specialty media tray (closed): Lower to insert a single sheet of heavy media, such as card stock or canvas. Use this tray when you want media to be fed straight through the printer, without being bent. Do not load media thicker than 0.7 mm, or more than one sheet at a time.
4Main tray: Place a stack of plain paper or photo paper in this tray for printing.
5Output tray: Print jobs come out here. For easier access to the main tray, you can remove the output tray by sliding it towards you.
6On button: Press to turn on the printer.
7Ink cartridge door: Press the raised bumps on the surface of the door to open and insert or remove ink cartridges.
Back of printer
1Rear door: Remove this door to clear paper jams.
2Rear paper slot: Print jobs from the specialty media tray pass back and forth through this slot before being ejected on the output tray at the front of the printer. Check that there is enough room behind the printer for the paper to pass back and forth through the slot without any obstructions. When you are printing from the specialty media tray, the space behind the printer should be equivalent to the length of paper you are printing on.
3Power cord connection: Use this port to connect the power cord included with the printer.
Printer parts | 3 |