HP StoreServ Application Suite for VMware Media manual Upgrading from a Previous Version

3PAR Management Plug-In and Recovery Manager 2.1.0 for VMware vSphere User’s Guide

3.5 Upgrading from a Previous Version

When upgrading from a previous version, the installer detects whether a previous version is installed and then either performs a new install or an upgrade. Before upgrading from a previous version, consider the details provided in the following sections.

3.5.1 Using Secure Service Connections

When installing 3PAR Management Plug-In and Recovery Manager for VMware vSphere 2.1.0 over an existing installation, you must first make sure that the previous version uses secure service connections. If the previous version is using port 9930 (or any other unsecured port), use the Admin Tool to enable the secure service option for the older version before performing the upgrade. See Chapter 4 for details.

3.5.2 Refreshing Plug-in Details

When upgrading from a previous version, if you view plug-in details from the Plug-in Manger, the version information is not updated to reflect the latest version. To correct this, use the Plugin Registration option available through the RMVMware Admin Tool to unregister and then register the plug-in with the vCenter server (see 4.3.2 Plugin Registration on page 4.8 for

details).

3.5.3 Updating CLI Scripts

Due to additional security requirements in the current version of the product, the CLI syntax has been modified to require the vcuid option when using the RMVMware create

command. if you have preexisting CLI scripts, you need to make sure they conform to the new CLI syntax used in the current version.

3.10

Upgrading from a Previous Version