3PAR Management
Table
Field | Description |
|
|
Start Service | Starts the Host Explorer service. |
|
|
Stop Service | Stops the Host Explorer service. |
|
|
Refresh Service | Refreshes/restarts the Host Explorer service. |
|
|
Change Refresh | Allows you to change the refresh interval that determines how |
Interval | frequently the host explorer service checks for host changes. The |
| current state is compared with the previous state and, if there |
| have been any changes, the InServ is updated. The default refresh |
| interval is set to 12 hrs. |
|
|
Status | Indicates whether the 3PAR Host Explorer service is currently |
| running. |
|
|
NOTE: The Host Explorer Service needs to be restarted after changing the refresh interval time.
4.4.2 InServ Mapping
The InServ Mapping option is used to map existing InServ credentials to be used by Host Explorer for submitting corresponding ESX host information. The InServ credentials need to be created via InServ Credential or RMVMware.exe prior to the mapping. Since Host Explorer uses the system ID obtained from ESX host information to determine which InServ it is connected to, only one mapping is allowed per InServ. The Host Explorer InServ Mapping option appears (Figure
Host Explorer Tab
4.13
