1-32 IBM Informix OnLine Database Server Administrator’s Guide
Shared-Memory Parameter Guidelines

DBSERVERNAME

DBSERVERNAMEspecifies a unique name associated with this specific occur-
rence of OnLine. The identifier distinguishes this OnLine server from all
other database servers in the $INFORMIXDIR directory and the network, if
one exists.
The value of DBSERVERNAME cannot exceed 18 characters. Valid characters
are restricted to digits, letters, and the underscore. The default value of
DBSERVERNAME isONLINE.
Shared-Memory Parameter Guidelines
This section describes how to assign values to the OnLine shared-memory
parameters.
Aspart of the initialization procedure, DB-Monitor prompts you to enter the
values of all but eight of the shared-memory parameters listed in
tbconfig.std.
These eight parameters are used to tune performance. Default values are
used during initialization. Tuning is best done later, when you can monitor
and evaluate OnLine performance under typical working conditions. The
eightperformance parameters do not appear on the configuration worksheet
but they are described in this section.

RESIDENT

The value ofRESIDENT indicates whether OnLine shared memory remains
resident inUNIX physical memory. If your UNIX system supports forced
residency, you can specify that OnLine shared memory is not swapped to
disk.
The size of OnLine shared memory is a factor in your decision. Before you
decide on residency, verify that the amount of physical memory available
aftersatisfying OnLine requirements is sufficient to execute all required UNIX
and application processes.
Thedefault value of RESIDENT in tbconfig.std is 0, indicating that residency
is not enforced. A value of 1 indicates that residency is enforced.