Chapter 1. Remote Control sessions overview 55
Example 1-20 The nd_start_target method for an RC Proxy-TFST architecture
loc-oc 11621 23
Results: (encoded):
"" 0
Example 1-21 details the nd_start_controller method started from the Spoke
TMR Server in a multi-TMR architecture and it shows more useful information to
understand how the information about the Target Proxy is passed to the
Controller. It refers to the following line in Example1-7 on page 25:
1380596993.7.522+#TMF_Endpoint::Endpoint# nd_start_controller
This method is used to start the local Remote Control process on the Controller.
As a reference, the following information is needed to interpret Example 1-21.
The Target IP address is 9.3.5.29
The Controller IP address is 9.3.4.244
As the Target Proxy is installed on the same machine as the Endpoint Proxy,
the Controller doesn’t need this to know the Target Proxy IP address.
The 5020 number, in fact, is the port number on which the Target Proxy is
listening. This port is defined in the rc_def_proxy Policy. The return code of this
method is 0; this means that the session star ts without error.
Example 1-21 The nd_start_controller method for an RC Proxy-TFST architecture
rem-ic 11625 M-H 1-11608 227
Time run: [Thu 30-Jan 18:34:04]
Object ID: 1519322503.35.522+#TMF_Endpoint::Endpoint#
Method: nd_start_controller
Principal: root@tic01002 (0/0)
Path:
Input Data: (encoded):
"\tivoli\pcremote\eqnrsmai.exe"
{
1
[
"/I9.3.5.29 /
],
,((!?+;
]
/Ntic01007 /
],
,((!?+;
]
/C5020 /E /B12 /M /T /