
 Chapter 2. Implementation planning  63
Table 2-1   RC ports for unidirectional communication - Parent/initiator
Comments:
1. This port can be fixed in the rc_def_ports RC Policy.
2. This default port could be changed  using the proxy-port parameter in the 
[rcproxy] section of the Parent rcproxy.cfg file, that in this case is the RC 
Target Proxy configuration file. This port must match with the port defined in 
the rc_def_proxy RC Policy.
3. This port or port range could be fixed by configuring the local-port-range 
parameter in the [children-cm-info] section of the Parent rcproxy.cfg file, 
in this case the RC Target Proxy configuration file.
4. This port must be configured usi ng the parent-local-port parameter in the 
[communication-layer] section of the Child rcproxy.cfg file, in this case the  
RC Controller Proxy configuration file. This port must match with the port 
specified in the children-remote-list parameter in the 
[communication-layer] section of the Parent rcproxy.cfg file, in this case 
the RC Target Proxy configuration file.
5. The default polling interval could be changed  by configuring the 
polling-interval parameter in the [children-cm-info] section of the 
Parent rcproxy.cfg file, in this case the RC Target Proxy configuration file, as 
it is the initiator.
Source Destination Protocol Description
Type
(Service)
Port 
(Single / 
Range)
Type
(Service)
Port 
(Single / 
Range)
Controller
(eqnrsmai)
random or 
defined1
(single)
Target Proxy
(rcproxy)
94942
(single)
TCP Star ted at request.
Communication in the 
same network zone.
No firewall rule needed.
Target Proxy
(rcproxy)
random or 
defined3
(single or 
range)
Controller 
Proxy
(rcproxy)
defined4
(single)
TCP Star ted at servic e time.
Communication between 
two network zones.
Firewall rule need ed.
Default polling interval is 
2 seconds5.
Controller 
Proxy
(rcproxy)
random
(single)
Target
(eqnrcmai)
25016
(single)
TCP Star ted at request.
Communication in the 
same network zone.
No firewall rule needed.