76 IBM Tivoli Remote Control Across Firewalls
Supporting applications requirements
Before installing any IBM Tivoli Remote Control Proxy, you must h ave the
following software components installed, up and running:
򐂰IBM Tivoli Management Framework 3.7.1 or higher.
򐂰IBM Tivoli Remote Control 3.8 or higher.
򐂰Tivoli Firewall Security Toolbox 1.3 or higher for an RC Proxy
Non-Standalone architecture.
In addition, you must install:
򐂰IBM Tivoli Management Framework Agent of the IBM Tivoli Management
Framework 3.7.1 or higher (lcf version 91 or higher) on the workstations that
should work as Controllers and Targets.
򐂰IBM Tivoli Management Framework desktop on the workstations where you
want to use the Tivoli Remote Control graphical user interface.
You need to have one of the following Web browsers on the workstations where
you want to use the IBM Tivoli Remote Control Web interface:
򐂰Netscape 4.6 or later
򐂰Internet Explorer 5.0 or 5.5+SP1®
Hardware requirements
Table2-7 lists the m inimum hardware requirements. These requirements are
only for the IBM Tivoli Remote Control Proxies. If you plan to use a
Non-Standalone solution, you should also take in consideration the hardware
requirements for the Tivoli Firewall Security Toolbox.
Table 2-7 Hardware requirements for IBM Tivoli Remote Control Proxy
Always refer to the IBM Tivoli Remote Control Release Notes, SC23-4844, for
up-to-date hardware requirements for IBM Tivoli Remote Control Proxies.
HW Intel platforms A IX® platforms SUN platforms
Processor Any Pentium systems Any pSeries systems Any SPARC systems
RAM 64 MB minimum
128 MB recommended
64 MB RAM minimum
128 MB recommended
64 MB RAM minimum
128 MB recommended
Hard disk 28.3 MB for Windows
35.7 MB for Linux
32.1MB 57.8 MB