IBM GC23-7753-05 manual + Removing a Snapshot with the Deployment Utility, #Locks

+	#ROOTPATH
+
+	# WIN6432 - Windows only - Set this to 1 if installing a 32-bit version of IDS
+	#	on a 64-bit Windows operating system.
+	#	- Range: 0,1
+	#WIN6432 0
+
+	# Onconfig customization
+	# Use the BEGIN ONCONFIG and END ONCONFIG statements to add or override
+	# configuration parameters values in the onconfig file.
+	# Use instead of providing an onconfig file.
+	# Example:
+	#BEGIN ONCONFIG
+	#LOCKS 10000
+	#END ONCONFIG

+

+ Removing a Snapshot with the Deployment Utility

+	Use the deployment utility to remove a snapshot that was originally deployed by
+	the deployment utility. In addition, you can use this utility to remove user
+	informix and the Informix-Admingroup from the operating system.
+	You must have Windows administrator privileges to remove the snapshot or
+	remove the user and group objects.
+	You must have the IDSFILES.txt file in the etc subdirectory of the installation
+	path.
+	To remove a snapshot:
+	Run the ifxdeploy command with the uninstallation options on the computer
+	where the snapshot is deployed. See “ifxdeploy Command: The Deployment
+	Utility” on page 5-5for details about the command syntax.
+	The following command is an example of how to use the deployment utility to
+	remove a snapshot and to display runtime status messages:
+	ifxdeploy.exe -u C:\tmp\informix -verbose
+	The following is an example of how to uninstall a snapshot and to remove user
+	informix and the administrative group:
+	ifxdeploy.exe -u C:\tmp\informix -verbose -delifx
+

Chapter 5. Deploying IDS with the Deployment Utility 5-15