IBM GC23-7753-05 manual #Onconfig, #Snapshot, #Relocate, # Relocate, #Loglevel, # Rootpath

+	#		a new onconfig file is created based on the onconfig.std file.
+	#ONCONFIG
+
+	# SNAPSHOT - Set the location of the compressed archive. This parameter is the
+	#		equivalent to the -file command line option. The archive must be a
+	#		.tgz file on UNIX or Linux and a .zip file on Windows. Only set
+	#		this value if you are supplying a compressed snapshot of an IDS
+	#		instance.
+	#SNAPSHOT
+
+	# RELOCATE		- Set to the new location of dbspace chunks.
+	#		Use one of these methods or a combination of methods 2 and 3:
+	#		- Method 1: new_path (relocates all chunks to the specified path)
+	#		- Method 2: old_path=new_path (relocates only chunks
+	#		created in the old path to the new path)
+	#		- Method 3: old_path,old_offset=new_path,new_offset;
+	#		(relocates chunks and moves offsets)
+	#		You can specify multiple paths with methods 2 and 3 by
+	#		separating old and new path sets with a semicolon (;).
+	#
+	#RELOCATE
+
+	# Authentication values
+	# INFORMIXPASSWORD - Set the password for the informix user.
+	#		- If not set, can be supplied on command line or
+	#		interactively.
+	#		- Not required if the SYSTEM parameter is set to 2.
+	#INFORMIXPASSWORD
+
+	# SYSTEM - Windows only - Set the IDS service to log on as the Windows
+	#		Local System user.
+	#	- Values:
+	#		0 - IDS service logs on as the informix user.
+	#		1 - IDS service logs on as the Local System user but creates the
+	#		informix user.
+	#		2 - Do not create the informix user.
+	#SYSTEM 0
+
+	# Logging parameters
+	# LOGFILE - Set the file for Deployment Utility errors and messages.
+	#LOGFILE
+
+	# LOGLEVEL - Set the amount of information to write to the log.
+	#
+	# 1	- FATAL - only print fatal errors.
+	# 3	- WARNING - print warnings and fatal errors.
+	# 5	- INFO - print informational messages, warnings, and fatal errors.
+	# 10 - DEBUG - print debugging information and all other messages.
+	#
+	#LOGLEVEL 5
+
+	# SILENT - Set to 1 to prevent console output sot that errors and
+	#		messages only appear in the log file.
+	#	- Range: 0,1
+	#SILENT 1
+
+	# FORCE - Set to 1 to overwrite existing settings
+	#	- Range: 0,1
+	#FORCE 0
+
+	# INSTALLDRIVE - Windows only - Set to the drive where data spaces will be
+	#		created
+	#		- Range: C-Z
+	#INSTALLDRIVE C
+
+	# ROOTPATH		- Set to the path for the root dbspace
+	#		- Default is \ifmxdata\$INFORMIXSERVER\rootdbs_dat.000

5-14IBM Informix Dynamic Server Installation Guide for Windows