IBM Safenet/400 Activating SafeNet/400 Alert Notification, Creating a Distribution List, 11.5

Activating SafeNet/400 Alert Notification

1.From the SafeNet/400 Special Jobs Menu select Option 7 - Change Alert Notification Status or use the CHGNOTIFY command and press F4.

2.Type *ON for parameter ALERT to activate alert notification, then ENTER.

3.Enter *YES to receive summarized alerts or *NO for detailed alerts.

4.Enter *YES to receive alerts as e-mail or *NO to receive alerts as workstation messages only.

Your system must be configured for SMTP before e-mails can be used.

5.Enter the message queue(s) and/or e-mail distribution list(s) that should receive these alerts. You can send alerts to both message queues and distribution lists.

The alerts are not sent to message queues in *BREAK mode. To receive these alerts immediately, make sure the user message queue is in *BREAK mode. (See CHGMSGQ command in the IBM CL Manual)

6.You can enter individual e-mail addresses to receive alerts in addition to, or instead of, message queues and distribution lists.

Use the ‘+’ sign to enter additional values.

7.Press ENTER to display the parameter to set the Summarized Alert Interval

If the Summarized Alerts parameter is set to *YES, you can specify the number of minutes between alerts. You will receive notification when each interval expires, indicating the number of rejections since the last notification.

Creating a Distribution List

Use the CRTDSTL command to create a distribution lists for SafeNet/400 alerts.

SafeNet/400 Reference Guide
♥ Copyright 2008 MP Associates of Westchester, Inc.	11.5
V8.50 - May 2008