IBM Safenet/400 manual Resetting Level 5 within SafeNet/400, 11.1

Chapter 11 - SPECIAL SAFENET/400 CONSIDERATIONS

This section contains information on procedures that will help you manage and automate certain SafeNet/400 functions.

Resetting Level 5 within SafeNet/400

When an installation has a user exit program in place that SafeNet/400 does not recognize, the exit point will automatically be set to Level 5 (unsupported). To allow SafeNet/400 to support this server you must do the following:

1.Remove your user exit program from the registration facility in OS/400. Type WRKREGINF and press ENTER

Locate the exit point and remove your exit program.

Important: Do not remove any program called from PCSECLIB.

You may have several servers set to Level 5. You must remove each one. Then, using the DSPNETA or CHGNETA command, verify that the System i5 network attributes DDMACC and PCSACC are both set to *OBJAUT.

If these attributes are not initially set to *OBJAUT, SafeNet/400 will flag several exit points to Level 5.

2.Type the following:

CALL PCSECLIB/DELST5CL and press ENTER

3.From the SafeNet/400 Main Menu select Option 1 - Work with Server Security Settings or use WRKSRV command.

Press F3 to exit without making any changes

4.Using the System i5 console, you must place the system in a restricted state with the ENDSBS *ALL *IMMED command, or any other site-specific shutdown process.

5.De-activate SafeNet/400

From the Special Jobs Menu select Option 6 - Activate/De-Activate SafeNet/400

SafeNet/400 Reference Guide
♥ Copyright 2008 MP Associates of Westchester, Inc.	11.1
V8.50 - May 2008