Move your cursor to the name you want to change in the Editable Names column. Press ENTER to record the change.
To use this function make sure you are looking at the Currently Active DHCP Addresses Bound screen. Use F2 if necessary to switch.
F5 pings the addresses
This will ping all the IP addresses that are displayed. The responses will flash at the bottom of the screen. When the process has completed, you will see a Ping Status column indicating the results of the pings.
If you are looking at the active addresses, you will ping those. If you are looking at expired or released addresses, all of those will be pinged.
Be aware that pinging the expired or released addresses can take a very long time depending on the last time the list was purged.
The number of packets and time to wait are controlled by two data areas: PINGPKTS and PINGTIME in PCSECDTA.
The default is one packet and one second wait. You can change these data areas manually if required.
| SafeNet/400 Reference Guide | |
5.4 | ♥ Copyright 2008 MP Associates of Westchester, Inc. | |
V8.50 - May 2008 | ||
|
