IBM Safenet/400 manual Setting up TCP/IP Address Control Table, Example

Setting up TCP/IP Address Control Table

1.Use SafeNet/400 Main Menu Option 7 or the WRKTCPIPA command

2.In IP Addresses for Server enter *FTPSERVER, *FTPCLIENT or *TELNET for the proper control table.

3.Type the addresses to accept or reject. A indicates Accept; R indicates Reject. Example 1:

Accept/

AddressReject

10.2.2.XA

10.2.2.5R

In this example any address from 10.2.2.1 through 10.2.2.255 will be accepted, with the exception of 10.2.2.5, which will be rejected.

Example 2:

Accept/

AddressReject

10.2.2.1XXA

10.2.2.14XR

In this example all clients with addresses from 10.2.2.100 through 199 will be accepted, with the exception of clients addressed 10.2.2.140 through 10.2.2.149, which will be rejected.

To print the control table, select Option 6 - Print TCP/IP Address Control Listing on the SafeNet/400 Reports Menu.

SafeNet/400 Reference Guide
♥ Copyright 2008 MP Associates of Westchester, Inc.	3.7
V8.50 - May 2008