IBM Safenet/400 manual To activate or de-activate SafeNet/400

To activate or de-activate SafeNet/400:

Remember, you must be a SafeNet/400 Super Admin to perform this step.

1.From the Special Jobs Menu select Option 6 - Activate/De-Activate SafeNet/400 The Server Activation Control screen is displayed, indicating the current setting.

2.Press F5 to change the setting and return to the Special Jobs Menu.

3.After performing these steps, end all subsystems then restart them to maintain security integrity.

4.Try your network request again. If SafeNet/400 is active, and your request is not successful, review your request log and correct the problem based on the error code on the report.

	SafeNet/400 Reference Guide
9.2	♥ Copyright 2008 MP Associates of Westchester, Inc.
	V8.50 - May 2008